Sunday, November 23, 2014

Playing with sketch function in Cameo

Someone else (sorry I can't find out who, but think it was on this list)  put me on to the great bargain of gel pens at COSTCO. 100 Tek gel pens for $19.99 from COSTCO

They sell for $49.99 at Amazon: picture here:


  I have them, soooo many colors and nice metallic colors too.  So, I decided to put them to the test
I also boought the pen holders from Amazon here: Silhouette Pen Holder
but they have no instructions and it wasn't til I saw this blog tutorial that I figured out how to use them:

 So now I was ready.  the pens come with a rubber grip which I sliced down and removed --nice razor slice enables you to put it back on after using.  here's pic 
Displaying IMG_20141123_083252.jpg
So I tested it with a new font I downloaded called League Script (free)

and made some adjustments to pen depth, then marked the pen as shown in above pic.

Just did name and address but thought I would give the whole thing a workout.  I had just created a very complex design using Inkscape to bend a design and possibly use as a silkscreen or print image, but I had traced it and did some other work i SD so it was a cuttable image, tho not one I would try to cut for obvious reasons, wayyy to complex, but I thought hey might be good for sketch.  I am very impressed, see pics below---First test in the middle I ran through twice when the lock on the pen assembly unlocked, Obviously pen too far down and a mess, top address came out good so that is the place I marked, but whoa, the sketch of the seabirds was great, Too bad camera doesn't quite pick up slight metallic.  Anyway, thought it might be useful:

Thursday, November 06, 2014

one more

This plate did not get in bisque firing  and previous glaze firing so it just came out of a firing that had some items glazed after bisque and some items single fired.  I love to edit my photos as part of my glazing notes.  I have an android tablet and use Photo Editor app to do this and it is quick and easy.
I had used a foam cut to make this ---
here is foam cut
I just free handed outside curved edges.

Sunday, November 02, 2014

glazed and dazed

At this post, I shared the silkscreened ornaments in greenware stage.  Here they are glazed on both sides, wired with little bow on top, I think they are cute

Tuesday, October 28, 2014

Story of a pot gone bad

The story of a very bad pot:  looks so innocent sitting on shelf between glazes doesn't it?
In it's early life, after bisque but before glazing:
I didn't like the sloppy way I painted on the underglaze so I decided to steer this poor pot on its path to ruination, see above as it awaits more glaze
The rest  is history, pot stuck to shelf made a huge mess see previous posting, but alas, quite a beauty in death:  

and the moral of the story is--------------

The Good, the Bad, and the Ugly

OK opened up kiln yesterday, as the title says, a bit of all.     But maybe I should begin with the "good".  There were a few:  

The heart plate above was made using this foam cut.  The first "regular" thickness foam I cut on my new Cricut Explore which resulted in deeper impressions.  I think the raggedly edges of the cut are not as good as the cleaner edges I get from the Cameo, but on clay, it doesn't seem to matter, so I now have the option of deeper impressions if I want them.  Here is the foam cut:

Then there were the bad and the ugly
The testing of the "new" Spectrum Green Mirror Glaze did not work out well, Caused the piece to crack, but to be fair, it probably wasn't constructed well, although it made it through the bisque firing.

  But the piece that made the biggest mess was the one that totally stuck to the kiln shelf, "and" ran off shelf onto another piece below.  While kiln was ramping up,  I remembered, while lying in bed, that one item I glazed with 3 coats of Spectrum "Old Copper" I had not elevated    ( put on stilt) in case the glaze ran. Well it ran all right.  But there is a lot to be learned here.  The piece is  goner, but I do like the way that glaze did over black underglaze and will try it again, next time with more care regarding the glaze running.  I had used the glaze before on a couple of single fired pieces shown here last May.  These were flattish pieces and I could see some running underneath, but it was not  problem.  Maybe I only used 2 coats also.  When in doubt, protect the bottoms and shelves, lesson learned.

As I loaded up kiln, I had this pushed to edge of shelf and that glaze just ran down on item on lower shelf too:  You can see this down he frog's back here:
More later----

Sunday, October 26, 2014

Announcing kiln load "before" opening is pretty risky but---

All the items in previous posting and a few not made with foam cuts have been glazed and kiln just finished, but must wait 24 hours to unload.  Will I share results?  As every potter know, there are so many surprises in the glazing business, esp since I never use same things and use every kiln load to experiment a bit also.  So, fingers crossed until tomorrow morning when it will be safe to open.  Recently I have been single firing but have encountered some issues with just some of the items with pinholing glazes, etc., so this time I bisqued "most" of the items now in the kiln, small handful though went in as single fired.  I got some Spectrum low fire metallic glaze in the mail as I was glazing on Friday, so one of the items has been glazed in Mirror Green.  Will be interested to see what that looks like.  So, if not posting tomorrow you will all know it was a "bust.!"  but maybe I'll share that too, everyone has them.  Til the morrow.

Thursday, October 23, 2014

pottery made using foam texture templates

Awaiting glaze.

Made using foam template on right

Made using this foam template used thicker foam --all others made with thin foam from Dollar Tree I hand cut the insides of scalloped edge after leather hard
Easy to do since they were impressed from foam

damask pattern on round box created by this foam cut with Cameo packing tape applied to back before separating negative from positive.  Putting packing tape on one side before removing from cutting mat then more packing tape on other side you
Then can separate the design leaving positive on one side and negative on other both of which can be used

used foam cut below to get raised design then handpainted with black or gray underglazes


Friday, October 17, 2014

Update on using embossing pen in Cameo

I bought the new penholders from Amazon, hoping they would work with the embossing pens from Ranger in the Cameo, but none of them worked, so back to plan B, simple and cheap foam cushions from dollar store, I had tried to push these onto the pens without any luck, plus they were too narrow to fit the Cameo,"but" I sliced it down and it worked perfectly
Here is the pen shown in the holder, doesns't go all the way around but works just fine.  I needed something I could slip on and off quickly so that I could put the cap back on the pens so they wouldn't dry out.
The pen now fits in the holder nicely and I quickly sketched and embossed this design on scrap cardstock, excuse the paint splatters.  So now I can use the Cameo to sketch and heat emboss any design in my files as needed.

Wednesday, October 08, 2014

More experiments with those Ranger "Emboss It" Pens

OK, so you don't have a Cricut, Explore, or even a Silhouette Cameo, those embossing pens are still pretty wonderful.  Just print out whatever designs/images you want on whatever project you are working on, and use pens to trace over design.  Then sprinkle with embossing powder and zap with heat gun and you get the same effect.  I had previously printed designs onto deli paper and blogged it here:   see the kids on bicycles that I "printed" in gray, just to test what I would get, but now I quickly scribbled over them with the black Emboss It Pen then sprinkled it with fine clear embossing powder, and now it looks like this (I intentionally didn't fill in everything to see what it would look like),

Then I tried using Embossing Pen in Black on other Deli Paper.  I had printed butterflies in Blue and printed them onto deli paper but they were too faded so I traced a couple with the embossing pen in black and doodled on paper also and here is result:
Then I wondered if the emboss it pen would work on the fabric I printed of one of my painted deli papers and it worked sort of.  I still had the fabric on the carrier sheet and had not removed it, so I traced over a butterfly that I had printed, in these pictures you can see the powder sprinkled on the half of the butterfly I had traced with the emboss it pen, then a pic of what it looked like after using heat gun.  It left a texture, but not the smooth shiny texture you get on a non pourous surface, but I guess I could go over it again and build up layers  Anyway good for experimenting: