I love my Cameo, sketch with pen and cut on full page labels

Sometimes I am not very happy with the results that I get from my printer when it's printing very fine detailed text, in black on white cardstock. Perhaps it is because I'm using the back feed on my printer, perhaps it's because there is an overspray from the ink in the cartridge.

 Rather than trying to figure out and test all of these I recently decided to just combine using a rollerball pen as a sketch function to get the text and frame drawn around the text.  What I was trying to do is get labels that I could stick on the backs of my handmade cards and other things I make.
I love using full page labels to make my stickers, See postings here, and here, and here.   I get mine from online labels and it's very inexpensive and rather than use the ink in my printer to do this I decided to let the cameo do the work with a rollerball pen.  I wrapped a little washi tape and then covered with a foam pen holder (cheapies from Dollar store) which I had cut to fit pen, then inserted into regular cameo blade holder and adjusted so when the mechanism came down, the pen would make its mark.  I thought it was amazing that such small text came out so well, better than my printer.  The font I used is one I got in one of my old Hungry JPEG bundles, called Azurra Script--

The following pictures show you the results and I am quite happy with them what I did was turn on and off the various elements that I wanted to either sketch with the rollerball pen and then turn those elements to "No Cut"  when it finished, IMPORTANT, do not unload the mat!   I had a slight offset around the frame that was made "uncut" in the sketching phase, and after that was completed, I set the text and frame to "NoCut" and set the offset line to Cut, and using the Silhouette Settings for white sticker paper, and adding the ratchet blade set at 8, I then "sent to silhouette" (remember, mat was never unloaded),   The pictures below show the results

Foam Cuts using Cameo, now I have even more uses for them as Stamps with MISTI

Cutting foam with my Cameo has been an obsession since I began experimenting with these foam cuts for use with clay/pottery.  Because now these very, inexpensive to produce, foam cuts have even more utility if the "positive" can be used easily as stamps, especially with the MISTI.  This wonderful tool enables restamping perfectly to get more vivid, bold stamped images (see previous Posting and video on how I do this).  I thought I would make it easy for you to crawl through almost 4 years of my experiments with cutting foam by providing direct links to those posts.  Before I do, I have this picture to show you how one cut from that Dollar Tree foam can provide two useful products.  You can actually use both sides (positive and negative) as stamps (or on gelli plate for those playing with that technique), but if any of you have friends dabbling with pottery/clay, you could give them the parts that create raised images, they will be very excited when they start using them.  I have actually sold some to many local potters here.

But as promised, here are all the links to almost 4 years of experiments on cutting and using foam cut with the Silhouette Cameo

http://paulinesstuff.blogspot.com/2014/05/experimenting-and-playing.html

http://paulinesstuff.blogspot.com/2014/04/now-for-square-one.html

http://paulinesstuff.blogspot.com/2014/04/back-to-pottery-and-foam-cuts.html

http://paulinesstuff.blogspot.com/2014/02/finally-putting-it-all-together.html

http://paulinesstuff.blogspot.com/2013/12/still-playing-like-mad-scientist.html

http://paulinesstuff.blogspot.com/2013/11/details-on-how-foam-was-cut-using-cameo.html

http://paulinesstuff.blogspot.com/2013/09/more-foam-cuts-and-impressions-in-clay.html

http://s2.photobucket.com/user/paulinepdm/slideshow/Cameo%20Silhouette%20Digital%20Cutting

http://paulinesstuff.blogspot.com/2013/08/more-photos-made-from-impressing-fun.html

http://paulinesstuff.blogspot.com/2013/08/using-my-cameo-digital-cutting-machine.html

http://paulinesstuff.blogspot.com/2013/08/using-my-cameo-digital-cutting-machine.html

Find new and exciting ways to use patterns on Silhouette Studio Designer Edition

The fun I had in my previous posting using my pattern library to make washi tape has led me to another useful use of patterns "and" Inkjet Printable vinyl.  As you know, I have an Epson 13" wide format printer which I am loving, Workforce WF-7610.  I have not done a lot of vinyl work, just a few things made over the holidays as gifts using vinyl I had had but never used before.  I decided that if I were going to use vinyl again, and did not want to have a huge supply of all the various colors, I would look into getting Inkjet Printable vinyl which I could color anyway I wanted before cutting.  I found this 12" x 24" inkjet printable (PERMANENT) vinyl here.  So I ordered 4 sheets (if I cut in half, I have 8 12" x 12" sheets---for $15.80 plus $6.95 shipping --total $22.75  comes out to $2.84 per 12x12" sheet)  It is a lovely matte finish.  I have been having such fun adding interesting patterns to my pattern library, some are my painted papers, some are great images found here and there.

Now to put all that to work.  My smart phone is a Nexus 4 which I love,  I also love the leather case I have for it, see here.  However, I often misplace the phone in the house and because it is black, I often can't see it, so I have used my Device Manager to make it ring while I scurry from room to room looking for it.  So I tested a tiny bit of leftover vinyl from those holiday projects I made and found the vinyl sticks nicely to the leather.

So I made a template for both the front and back of the leather case, one having appropriate holes for camera and speaker openings, one which covers whole side with no openings.  Here is a screenshot of my template:

Then the fun began as I filled these templates with the various patterns I have added to my pattern library, see previous posting and video on how I fill objects with patterns.  I couldn't stop, this was so much fun.  I have to be honest, my first template was just the solid without the cutouts for the back.  I thought I could easily cut out the areas after sticking it to my case, which I did, but a much nicer job can be done if you get the placement and template working with the cutouts.  For one thing, you can "pan" or scale your design pattern in exact position where the holes won't matter.  I will, therefore share with you the printout of my vinyl showing only the full front templates as shown below and I have annotated the picture to show you another mistake I made

I also could have moved the registration marks to allow for wider print/cut area, so you can learn from my mistakes.  Well, I used the black cat ( I love my black cat named "Pepper"), and that graphic certainly makes my phone visible when I misplace it again.

What is nice, Is that I can change out the vinyl patterns when it suits me, The only thing is I keep thinking up new ideas for decorating my phone. 

 Here are some more I have been playing with.

 and here is a screenshot of some of the patterns and I have lots more that have been added to "my Patterns" .  Hope you are inspired to try some of these ideas.

:

making inexpensive washi tape using printer and Silhouette Studio Designer Edition

Happy NEW Year everyone  here are two videos showing new ways to use the Silhouette software with Designer Edition.  Sorry for 2 videos but I forgot a few important items covered in Part 2 and have not found good way (and the time) to edit them into one video